Reliable motors are done by Honda, only puts them not as everything, belts to the right, and on the contrary. Accordingly they also turn in the opposite direction - counter-clockwise. Insignificant, at first sight, distinction sets thinking, when it is necessary to turn off a pulley bolt of kneeshaft. To do it it is necessary at least each 100 thousand in km - for replacement of belt GRM, but there are also off-schedule works: epiploon replacement, for example. The bolt huge for a head on 17 moment 185 Н-м is tightened and to turn off it, the effort is required much more.
To shift a bolt, scrolling the engine a starter, it will not turn out: a rotation direction not that.
The engaged drive and the pedal of a brake pressed in a floor too do not help - transmission springs, but the bolt does not surrender. On old cars in a clutch crankcase there is a window opposite to a flywheel wreath, and some try to stop its mount or sharply sharpened breakage. Such duel of the person with car at times comes to an end with the spilt blood or an unwrapped crankcase, and happens, both that, and another. In a pulley it is provided hexahedron cut under a firm key. Only here hexahedron on 51 with a bore under a head on 17 on sale not to find, and to order for single works - expensively. Meanwhile preparation for a special key is on sale in any market: a lock nut
Radiators on 54, an inner diameter (on a thread) - 39 mm, width - 10 mm. We recut its sides on 1,5 mm, we weld the strong flat handle in length of 180-220 mm - the tool is ready. On some pulleys corners between cut sides are rounded, therefore and on a nut it is possible to cut reciprocal parts a few. We turn on a bolt a head on 17 with the extension piece and the powerful handle.
It is possible to weld the ground preparation on a VAZ key for a bent shaft nut - the universal wrench VAZ-Honda will turn out. The handle is convenient for establishing on a drive axis of a front wheel.
That the key has not come off, we establish the extension piece on a reliable support. At times even a wheel to remove not necessarily, however if tyres of more diameter, than regular are established, a wheel it is necessary to remove or use nevertheless a key with propshaft.
